Khanly AI · Study guides · November 16, 2026

Research Presentation Slides: How to Build a Deck That Works

Printed research slides with a chart

Good research presentation slides start with one message, not with a template. Decide what the audience should remember, pick the few slides that carry it, and keep the details in your notes. Khanly’s AI PowerPoint presentation maker turns the notes, readings and research you upload into an editable deck, so you can spend your time on the message and the rehearsal.

Khanlyai
khanlyai.com
Turn Research Into Clear Slides
Upload your notes, readings, and research to Khanly to generate an editable PowerPoint presentation for your university coursework.
Visit

TL;DR

  • Write your goal first: what the audience should know when you finish. Cut anything that does not answer it.
  • Plan roughly one slide per minute for a short talk, in the order: title, background, question, methods, results, conclusion.
  • Put one idea on each slide, in short active phrases, and keep the fine detail on back-up slides or in your notes.
  • Use big text, clean graphs and a source line on every slide that makes a claim.
  • Rehearse out loud, and make sure you can talk about any slide if someone opens it at random.

Table of Contents

Start with the message, not the slides

Most weak decks fail before the first slide exists. The presenter tries to fit the whole paper into the talk. A University of Illinois library guide suggests asking what you want the presentation to say and what the audience should know afterward, then removing information that does not answer those questions.

Three questions settle most of the plan:

  1. Who is the audience? A peer-reviewed guide to scientific presentations (Grambow and Weinfurt, 2024) tells presenters to consider the audience, the time available and where you can realistically take people by the end.
  2. What is the take-home message? Trent University’s academic skills team suggests finding it by asking why the audience should care as much as you do, or by squeezing the talk into a 10-word sentence.
  3. What is the one story? The eCampusOntario guide to talks warns against overloading a talk with too much data or too many projects. Stick to a single project or component, and save related material for questions.

Write the 10-word sentence at the top of a blank document. Every slide you add later has to support it.

A worked example

Say you studied how noise affects focus in open-plan offices. Your paper has three surveys, two interviews and a long literature review. Your 10-word message might be: “Open offices help teamwork but hurt focused work.” The literature review shrinks to one slide of context. One survey and one interview theme become the results. The rest goes into a back-up slide for the question period.

Choose the slides and put them in order

Research talks follow a familiar order because audiences expect it. Harvard Catalyst lists the standard sections: title, background, a clearly labeled hypothesis, methods, results and conclusion. Results usually take the largest share of the time.

For a 10-minute talk, the University of Minnesota guidelines work at about one slide per minute:

Section Slides What goes on them
Title 1 Title, your name, course or institution
Introduction 3–4 Why the work is interesting, context, clearly stated hypotheses
Materials and methods 2–3 Design, sample sizes, statistical tests
Results 2–4 Simple, clean graphs with p-values alongside
Implications and conclusions 2–3 What the results mean, sources of error
Acknowledgments 1 Thanks and funding

Time per slide depends on the talk. Swarthmore College’s advice is 2–3 minutes per slide, so a 30-minute talk needs about 13 slides. The University of Lausanne guidelines say about one slide per minute at most, and 2–3 minutes is better. They also advise skipping “summary” or “outline” slides and showing no more than four key results per 15 minutes.

Order each section top-down

Put important ideas first, details second and conclusions last. The University of Auckland’s research communication guide splits a talk into three parts. The beginning has a hook, context, the specific problem and how you will solve it. The middle covers three to five key objectives or findings. The end summarizes, delivers the take-home message and points to next steps.

For a 5–15 minute talk, the Illinois library guide recommends opening with a quick story or question for big-picture context, choosing your three most important points, keeping methods brief and closing by tying back to your opening.

A time budget for short talks

The University of Kent’s oral presentation guide gives a 10-minute split: 1 minute for the introduction (1–2 slides), 8 minutes for the main body (4–8 slides) and 1 minute for the conclusion (1–2 slides). Use it as a check on your outline. If your methods take up half the deck, your results are being squeezed.

Ten-minute presentation time and slide allocation

Turn notes into slide text

This is where most students lose time. Your notes are full and complete, and a slide cannot be. A slide is something the audience sees while they listen to you. The eCampusOntario chapter on turning research into a presentation frames it this way: if a slide holds everything you plan to say, the audience has to choose between reading and listening.

Its process is audience, select, shape, show, say. Decide what the audience needs. Then decide what to show (a photo, diagram, graph, key number or short phrase) and what to say aloud. Keep the important qualifications when you simplify.

Rules for the words on a slide

  • Use active, direct language. Temple University’s guide contrasts “We performed these experiments” with “These experiments were performed by us,” and “Yearly” with “On an annual basis.”
  • Lead with the result. John Cochrane’s slide-writing advice from the University of Chicago says to state the main result as soon as possible, include nothing that is not needed to understand it, and avoid jargon and invented acronyms.
  • Move detail to speaker notes. The Grambow and Weinfurt guide says every pixel of screen information costs the audience effort, so most text belongs in the speaker notes.
  • Write a title that states the point. The eCampusOntario talks chapter suggests a descriptive title that carries the key message, with one key message per slide.
  • Show a point at a time. Temple’s guide advises revealing one point or a few points at once so the audience does not read ahead.

Before and after

Before: “An analysis of survey responses was conducted in order to ascertain employee perceptions of noise in shared work environments.”

After: “Most staff say noise hurts their focus.”

The full wording, the sample size and the question text can live in your notes or on a back-up slide. That is what back-up slides are for: Temple’s guide advises keeping essential details there rather than filling main slides with minute details.

Let a tool do the first draft

Turning pages of notes into a first deck is repetitive work. Khanly analyzes the notes, readings and research you upload and generates editable PowerPoint presentations from them. You still set the message and cut what does not serve it, but you start from a structured draft instead of a blank slide. If your source is a recorded lecture, the AI lecture note taker can turn audio or uploads into organized notes first. The AI research assistant is there for the reading stage.

Show data and evidence clearly

Results slides are where audiences either follow you or give up. The Minnesota guidelines say to use simple, clean graphs with proper axis labels, avoid extraneous 3-D effects, and avoid light colors such as yellow, light green and pink, which do not project well. Show the statistical test result (a p-value or significance asterisks) on the same slide as the graph.

Grambow and Weinfurt add three principles for data:

  1. Show only what is necessary for the story.
  2. Prepare people for what they will see: say what the axes are and what to look for before the data appears.
  3. Reveal data in steps.

For hybrid or online talks, they advise against leaving one slide up for two to three minutes. Split the content across slides or use animations such as PowerPoint’s Morph.

For method slides, the University of Illinois UBI Health guideline suggests introducing system modules one at a time with animation and returning to the overall diagram when you switch modules. It also asks for a key insight on each slide that a non-technical listener can understand.

Design for readability

Design for readability

A plain design beats a clever one. The eCampusOntario talks chapter recommends text of 18 pt or larger, including graph axes, bullet points rather than paragraphs and plenty of white space. It also asks for a large, clear slide number.

If you want a firmer standard, Gian Maria Greco’s accessible presentation guidelines suggest:

  • headers at 36 pt (never below 32) and body text at 30 pt (never below 26);
  • sans-serif fonts such as Arial or Verdana;
  • left-aligned body text;
  • no all-caps, underline or italics for emphasis, because they disguise letter shapes. Use color contrast or shapes instead.

Keep the same layout, fonts and colors on every slide. Temple’s guide suggests limiting color emphasis to two or three colors. A template is fine as long as it follows these rules. Editable output matters here, because you will change fonts, sizes and layout to fit your room and your instructor’s requirements.

Cite your sources on the slide

Put references where the audience can use them. The Lausanne guidelines say references are more useful at the bottom of the slide or under each figure, written as author, year and an abridged journal reference. The eCampusOntario chapter likewise suggests leaving space for references on each slide. Plan that space when you lay out the slide, not at the end, so the footer does not collide with your graph.

If you want the full bibliography, put it on the last slide after your conclusion or acknowledgments. Check that every figure and claim you took from a source has a line under it.

Rehearse and check the finished deck

Practice is where the deck gets fixed. Kent’s guide lists the benefits: you learn the material, check your timing, find the parts you explain badly and match your visuals to what you say. It recommends rehearsing in front of a friend or colleague and asking about clarity, audibility, speed and style.

A simple routine:

  1. Run it aloud with a timer. If you are over, cut a slide, not your speaking speed. The Grambow and Weinfurt guide notes that fewer words on slides also lets you trim talking points if earlier speakers run over.
  2. Open slides at random. The Lausanne guide suggests checking that you can comment on any slide, even if it is opened out of order.
  3. Read only the slide titles in order. They should tell the whole story. If they do not, rewrite the titles.
  4. Check the take-home message. Does your 10-word sentence show up at the start, in the middle and at the end? Trent’s guide says it should run through the talk, not appear only at the close.
  5. Test your numbers and sources. Compare each figure on the slides with your original data and paper.

Building the deck with Khanly

If you already have the notes, readings and findings, the Khanly AI PowerPoint presentation maker is built to take them to a finished, editable PowerPoint. Free accounts get 15 credits a month, with no payment information required. One-time top-ups run $5 to $20 on the pricing page when you need more. For the rest of your coursework, the study guide generator and flashcard generator work from the same material. For more study help, see the Khanly blog.

Khanlyai

FAQ

How many slides should a research presentation have?

A common guideline is one slide per minute, so a 10-minute talk has about 10 slides. Some advisers allow more time per slide: Swarthmore suggests 2–3 minutes each, which gives about 13 slides for 30 minutes. Check your instructor’s requirements, then set a number you can rehearse within the time limit.

What should the first slide after the title say?

It should give context and the problem. The University of Auckland guide recommends a beginning with a hook, context, the specific problem and how you will solve it. A short question or story that shows why the topic matters works well before you state your hypothesis.

How much text should go on each slide?

Use short phrases, not sentences, and keep one key message per slide. Text should be at least 18 pt, and bullet points beat paragraphs. Put what you will say aloud in the speaker notes, and keep minute details on back-up slides.

Do I need a summary or outline slide?

Not always. The Lausanne guidelines advise avoiding “summary” or “outline” slides in short talks, because they use up time. A clear opening and a conclusion that ties back to your message do the same job. Trent’s advice to tell the audience what you will say, say it, then say it again can be done in the spoken introduction and conclusion.

Can AI write my research presentation slides?

AI can build a first draft from your own notes and readings, which saves the repetitive work of laying out slides. You still decide the message, check every figure against your data and add your sources. Khanly’s presentation maker produces editable PowerPoint files, so you can adjust anything before you present.

Sources

Made with BabyLoveGrowth

Tackle your coursework in minutes with Ace

Build presentation decks, turn lectures into notes and flashcards, and research faster.

Keep reading

Back to blog